青岛优贝尔            15192604060
  • 索尔维罗地亚Z175MP橡胶制品补强助剂
  • 索尔维罗地亚Z165N环保橡胶密封产品用橡胶助剂
  • 索尔维白炭黑T383硅胶密封件抗结剂
  • 水溶性白炭黑Z1165MP索尔维微珠状高分散二氧化硅
  • 索尔维白炭黑Z1115MP橡胶汽车塑料密封件用
  • 索尔维通用性白炭黑Z195GR颗粒状易分散二氧化硅
  • 抗结剂T383白炭黑密封圈O型胶组合油封特种橡胶助剂
  • 油墨用消光粉S60弹性体塑胶体皮革用白炭黑
  • 粒径细分散性好硅橡胶混炼胶用白炭黑
  • 木器漆易分散用消光粉孔隙率大耐水性好
二氧化硅喷墨打印介质吸附剂 H-110
    发布时间: 2014-09-24 16:32    

二氧化硅喷墨打印介质吸附剂 H-110


二氧化硅喷墨打印介质吸附剂 H-110

二氧化硅喷墨打印介质吸附剂 H-110

1

二氧化硅喷墨打印介质吸附剂 H-110

Silicon Dioxide For Ink-jet Printing Absorbent 00-110

我公司专业致力专、精、新的高科技硅化工产品,开发的系列二氧化硅喷墨打印介

质吸附剂吸墨性强,干燥速度快,色彩还原逼真,在色彩的鲜艳度,饱和度,色彩的层次上

极大的提高了打印质量。

应用原理

二氧化硅喷墨打印介质是彩色喷墨基材表面涂层的吸附材料,涂层是彩色墨水的承接物,

因此介质的特性就是涂层的特性,打印是墨自墨头喷到纸张表面后,其中的水分被迅速吸收

渗透到涂层内层,同时涂层中的二氧化硅吸附剂可以将水分迅速吸收,从而可以保证墨滴中

的燃料不发生扩散,不串色,墨滴圆滑,边缘清晰,最后形成的图像效果逼真,分辨率高,

色彩鲜艳。

使用方法

1.将中海系列产品在油性体系中分散或水胶体系中分散过滤,作预涂层。

2.根据不同的配方,用量在5-14%(原纸或画布总量)

Our company is dedicated to professional, new and fine high-tech silicon

chemical products. Silicon dioxide ink-jet printing sorbent which is develops has

strong performance of ink absorption, quick speed of drying, vivid reproduction of

color. In the color brightness, saturation, color levels, greatly improved the print

quality.

Application of the principle

Silicon dioxide ink-jet printing sorbent is the absorption material for surface

coating of ink-jet printing and its costing is the joint of colored ink, therefore the

characteristics of the medium determines the characteristics coating. At the time of

printing, after the ink is jet to the surface of paper, water is rapidly absorbed and

filtered into the inside of coating,and the silicon dioxide sorbent in the coating can

rapidly absorb water so as to ensure that dye in the ink will not diffuse, mix colors,

to make even ink drops and clear margin,and finally to form vivid figures with high

frame rate and gorgeous colors.

Usage

1. Put the product in the system of distributing or waterborn system is used to

precoat.

2. According to the formula, add 5-14% in volume of paper or the canvas.